Descripción

150 W HF Dipole
Key facts HF dipole antenna for use in stationary applications The HF Dipole R&S®HX002H1 is suitable for setting up radio links over any distance. In particular, the optimized omnidirectional coverage ensures high transmission reliability over short and medium distances. R&S®HX002H1 can be operated together with the 150 W HF transceivers out of the SERIES 4100 family. The extremely fast setting time of R&S®HX002H1 allows frequency hopping operation in line with R&S®SECOM-H. The antenna enables silent tuning across the entire 1.5 MHz to 30 MHz frequency range. For this, the integrated tuning unit must first learn the correct tuning settings for the antenna in a user-defined frequency range. Thereafter the antenna achieves tuning times of <5 ms. Particular attention was paid to obtaining an effective lightning protection. The ATU is fully arc-protected against direct lightning strokes. It is tested to withstand arcs of 10 kV/10 kA. Recommended extras ATU control cable (LWL) (length 25m) R&S®GK4102 ATU control cable (LWL) (length 50m) R&S®GK4102
features & benefits
  • Omnidirectional coverage with high-angle radiation
  • No skip zone
  • Single mast installation, no ground plane required
  • Integrated tuning unit, capable of R&S®SECOM-H frequency hopping
  • Power handling 150 W PEP, 100 W CW at 100% duty cycle
  • Silent tuning over the full HF frequency range from 1.5 MHz to 30 MHz
  • Low probability of intercept (LPI)

Specifications
Frequency Range 1.5 MHz to 30 MHz
Polarization linear , horizontal
Max. Input power 150 WPEP / 100 WCW
Input Impedance 50 Ohm, VSWR < 1.5 (typ. 1.3)
Gain (5m above perfectly conducting ground) -12 dBi to 8 dBi (typ.)
Tuning Time  
First-time tuning typ. 1.5 s (max. 4 s)
Repeated tuning typ. < 0.2 s
Silent tuning < 5 ms
RF Tuning Power 30 W ± 1 dB
Frequency Hopping Capability in line with R&S®SECOM-H 
Electrical Connectors  
RF connector N-type female
Control interface optical control interface (LWL), in line with MIL-T-29504/4/5)
Voltage supply via RF cable (inner conductor)
Overvoltage Protection (control interface) lightning and overvoltage protection in line with VG 96 903
Maximum Distances ATU to transceiver  L 50 m 
MTBF 14.600 h in line with MIL-HDBK-217E
Dimensions  dipole length 10.7 m
Weight approx. 43 kg
Permissible wind speed  
without ice accretion 250 km/h
with 20mm ice accretion 130 km/h
''